Login or Join

Login in to use extra features of the site and join email list
 

Month Specials

JBL GTO4060 600W Max Car Audio Amplifier
JBL GTO4060 600W Max Car Audio Amplifier
Price: $449.99
$359.99
JBL GTO752 220 Watt 2-Channel Full Range Amplifiers
JBL GTO752 220 Watt 2-Channel Full Range Amplifiers
Price: $299.99
$279.99
JBL Sub Amp Deal
JBL Sub Amp Deal
Price: $319.98
$249.99
Alpine CDE-133EBT CD/MP3/WMA Receiver
Alpine CDE-133EBT CD/MP3/WMA Receiver
Price: $449.99
$399.99
E-mail  Print
Car Audio arrow Car Amplifiers arrow JBL arrow JBL BPX2200.1 D Mono

JBL BPX2200.1 D Mono

 




$3 199.99

price_match
  Click here to email us a query about this product
   

JBL BPX2200.1 D Mono

2200 Watt Parallel/Bridge Subwoofer Amplifier

• Unlike conventional mono subwoofer amplifiers that only deliver their maximum power into a single impedance, the BPX1100.1 and BPX2200.1 are two-channel amplifiers that can be bridged to deliver double the voltage of a single channel into impedances between 2 and 4 ohms. The two channels can also be connected in parallel - that''s right, parallel - to provide double the current of single channel into impedance below 2 ohms. This feature is patented and unprecidented in car audio amplification. Thanks Crown!

• Slope-selectable variable electronic crossovers - Both the BPX1100.1 and BPX2200.1 is equipped with a variable electronic crossover capable of setting the slope rate at 12dB or 24dB per octave. The crossover adjustment range is 32Hz - 320Hz.

• Dynamic Bass Optimization (DBO) - This provides variable filtering with adjustable "Q" below 100Hz, far beyond conventional "Bass Q" circuits, by allowing the low-frequency output to be optimized for specific subwoofer applications. Frequencies below an enclosure''s tunign frequency can be attenuated, preventing damage to the subwoofer and allowing the amplifier's power to be better utilized.

• High Effective Damping Factor - Both the BPX1100.1 and BPX2200.1 have a high Effective Damping Factor. The result is better subwoofer control and lower distortion.

• Both the BPX1100.1 and BPX2200.1 come equipped with a remote bass level control allowing you to optimize bass output for specific music or preferences from the driver's position.

• Full-range preamp outputs - In the event that multiple amplifiers are used in an application, this feature allows for streamlined system hookup. No high-loss Y-adapters or splitteres needed.
Power Output: 650 watts RMS x 2 channel at 4 ohms
and ≤ 1% THD + N

2450 watts RMS x 1 channel at 4 ohms,
14.4V supply and ≤ 1% THD + N

1810 watts RMS x 1 channel at 1 ohm,
14.4V supply and ≤ 1% THD + N
Signal-to-Noise Ratio: 67 dBA (reference 1 watt into 4 ohms)
Dynamic Power: 2940 watts at 4 ohms
Effective Damping Factor: 6.28 at 4 ohms
Frequency Response: 22Hz – 302Hz (-3dB)
Maximum Input Signal: 7 V
Maximum Sensitivity: 250 mV
Output Regulation: .12 dB at 4 ohms


Dimensions (H x W x D): 2-9/16" x 21" x 12-1/4"




 

Payment Method, Visa/Master Card , Bank Direct , Q Card , Farmers Card , Finance , Cash pick Up



You may also be interested in this/these product(s):

JBL BPX1100.1 D Mono
JBL BPX1100.1 D Mono
$2 199.99

Buy Now

Car Audio arrow Car Amplifiers arrow JBL arrow JBL BPX2200.1 D Mono

Last Updated: