* Alpine S-A60M - S-Series Mono Amplifier 1100w

All-new Digital Design

The all-new S-Series utilise Alpine’s advanced digital design which unlike a typical Class-D amplifier circuit adds all-digital dual post-filter feedback loop for unmatched accuracy and control, while minimising internal noise

Thermal Protection

Along with Alpine’s new intelligent amplifier platform, the new S-Series amplifiers feature an improved heat sink and protection circuit design that eliminates thermal shut-down, for dependable music playback.

RCA and Speaker Level Inputs

The S-Series amplifiers are equipped with low-level RCA inputs, which can also accept high-level speaker signal inputs. This allows for installation of the R-Series amplifiers into virtually any aftermarket or OEM factory audio system

Control Your Subwoofer

Conveniently control your subwoofer directly from the dash with the optional RUX-KNOB.2 remote bass knob controller. This accessory is also applicable for the S-A32F for when channels 3 and 4 are bridged.

High-Pass / Low-Pass Filter

With the High-Pass and Low-Pass filter you can assign the amplification channel to be used for door speakers or a subwoofer. You can then adjust the cut-off frequency for more precise tuning.

Features

Install

• Terminal Layout: One side
• Small footprint for easy installation
• Screw terminals (for speaker and power cables)

General

• Amplifier Type: Class-D (Digital)
• Channel Design: Mono Channel
• Thermal Management Control
• Top Mounted LED Power/Status Indicator
• Speaker Level Input with remote turn on
• Crossover: Adjustable Low-pass (LPF)
• Gain Control: Adjustable
• Bass EQ
• Bass Control: Remote Bass Control (RUX-KNOB2) Ready

Specifications

Max Power Output Ratings

• Total Max Power: 1100W

RMS Power Ratings

• Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600w RMS
• Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330w RMS

Sound Tuning

• Crossover: Variable LPF, 50-400Hz (-12dB/oct )

General

• Power Requirements: 14.4 V.DC (9 – 16 V allowable)
• Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
• High Level Input with automatic power on
• Cable size: Power Cable AWG 4, SPK Cable AWG 8
• Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
• THD+N (@ 10W into 4 ohms): <0.03%
• THD+N (@ 50W into 4 ohms): <0.08%
• Damping Factor: >1000
• Signal to Noise (@ 50 Watts into 4 Ohms): >105dB
• Weight: 1.9 k

Dimensions

• Heat Sink (WxHxD) mm: 204 x 58 x 204